ACL - time-based access list on IOS-XR

EEM - action mail

EEM Matching a string within CLI output

EEM sync and skip keywords

FlexVPN Hub and Spoke backup routes


Embedded Event Manager (EEM) is a technology on Cisco Routers that lets you run scripts or commands when a certain event takes place.  As Cisco states it:

*Cisco IOS Embedded Event Manager (EEM) is a powerful and flexible subsystem that provides real-time network event detection and onboard automation.*


Links:

https://networklessons.com/cisco/ccie-routing-switching/cisco-ios-embedded-event-manager/

https://www.cisco.com/c/en/us/products/ios-nx-os-software/ios-embedded-event-manager-eem/index.html

EEM Cisco Embedded Event Manager

DHCP

DHCPv6 - determining the IPv6 prefix assigned to an interface

DHCPv6 lease times on a Cisco IOS device

DHCPv6 relay agent

DMVPN - IPsec encryption order of operations

DMVPN - NHRP purge request

DMVPN - NHRP session attributes

DMVPN - OSPF and multiple areas

DMVPN - Phase 2 BGP peerings

DMVPN - Phase 2 EIGRP neighbor adjacencies

DMVPN - Phase 2 OSPF neighbor adjacencies

DMVPN - Phase 2 and multicast traffic

DMVPN - Phase 2 and summarization

DMVPN - Using the GRE tunnel key

DMVPN - What is the best routing protocol to use

DMVPN - mappings on hub and spokes

DMVPN - multicast commands

DMVPN - nhrp map and nhs command syntax

DMVPN - spoke redundancy

DMVPN - using a default route

DMVPN State of a tunnel

DMVPN dual hub dual cloud

DMVPN dual hub single cloud

DMVPN hierarchical topology

DMVPN redundancy options

DMVPN with more than two hubs

DMVPN

DNS - Authoritative Flag

DNS - Authoritative Server

DNS - Caching

DNS - Recursive Resolver

DNS - What is a delegation zone

DNS - stub zone

DNS - understanding zones

DNS cache windows PC

DSL - Asymmetric Digital Subscriber Line (ADSL)

DTP - Sending of Frames

DTP - best practice to disable

DTP - how to disable

Decrypt IPSec ESP traffic with Wireshark

Demarcation point

Difference between per-prefix LFA and per-link based LFA

Differences between CCIE and CCDE lab exams

Diffserv recommended configuration

Distribute-lists - using route maps to set attributes

Distribute-lists and named extended ACLs

EIGRP - Advertised metric is cumulative

EIGRP - Advertising a route using the network command

EIGRP - Hello interval and Hold time

EIGRP - Hop Count

EIGRP - Network command syntax

EIGRP - Queries

EIGRP - Reliable Multicast

EIGRP - Source of values for metric calculation

EIGRP - Summarization per interface

EIGRP - Update message exchange process

EIGRP - af-interface configuration mode

EIGRP - how metrics are sent in updates

EIGRP - metric computation method

EIGRP - metric equation

EIGRP - network command with no wildcard mask

EIGRP - stub site function

EIGRP Create and advertise a default route

EIGRP Feasibility condition

EIGRP Header

EIGRP IP bandwidth-percent example

EIGRP LFA FRR

EIGRP Refining the behavior of load balancing with traffic-share

EIGRP SIA timers

EIGRP authentication

EIGRP auto-summary

EIGRP change rib scale

EIGRP establishing remote neighbors

EIGRP header - ACK field

EIGRP named mode

EIGRP on the Nexus Platform

EIGRP redistributing named mode

EIGRP rib-scale

EIGRP seed metrics when redistributing

EIGRP split horizon verification

EIGRP split-horizon vs poison reverse

EIGRP unequal cost load balancing

EIGRP what happens when a feasible successor fails

EIGRP

EPC - Cisco Embedded Packet Capture

ERSPAN

EVE-NG supported Cisco and other vendor images

Equal-cost Multi-path routing

EtherChannel - applying configurations to the interface

EtherChannel - implementing over 802.1Q tunneling

EtherChannel - load balancing algorithms

EtherChannel - max-bundle

EtherChannel - prerequisites for bundling

EEM Cisco Embedded Event Manager

Links to this page: