
You can change the [EIGRP](/eigrp) Routing Information Base (RIB) scaling factor with the `metric rib-scale` command under the address-family.

The default value is 128, the range is 1-255.

```
R1# configure terminal
Router(config)# router eigrp virtual-name
Router(config-router)# address-family ipv4 autonomous-system 123
Router(config-router-af)# metric rib-scale 100
```

## Links

https://www.cisco.com/c/en/us/td/docs/ios-xml/ios/iproute_eigrp/command/ire-cr-book/ire-i1.html#wp3124598758

EIGRP change rib scale

EEM - exit status variable

EEM Cisco Embedded Event Manager

EEM Matching a string within CLI output

EEM sync and skip keywords

EIGRP - Advertised metric is cumulative

EIGRP - Advertising a route using the network command

EIGRP - DUAL Algorithm and FD Set to Infinity

EIGRP - External routes from different ASes

EIGRP - Feasible Successors and the DUAL Algorithm

EIGRP - Hello interval and Hold time

EIGRP - Hop Count

EIGRP - Message TTL value of 2

EIGRP - Metric Equation Multipliers

EIGRP - Network command syntax

EIGRP - Queries

EIGRP - RTP's reliable message exchange process

EIGRP - Reliable Multicast

EIGRP - Router ID and loop prevention

EIGRP - SIA Process and RTP retry attempts

EIGRP - Source of values for metric calculation

EIGRP - Static neighbors over any L2 technology

EIGRP - Stub Router

EIGRP - Stub default behavior

EIGRP - Stub router types

EIGRP - Summarization per interface

EIGRP - Understanding Advertised Distance (AD)

EIGRP - Update message exchange process

EIGRP - Viewing RTP in Wireshark

EIGRP - af-interface configuration mode

EIGRP - how metrics are sent in updates

EIGRP - internal vs external routes

EIGRP - metric computation method

EIGRP - metric equation

EIGRP - named mode name

EIGRP - network command with no wildcard mask

EIGRP - redistribute connected and static routes

EIGRP - shutdown command

EIGRP - stub site function

EIGRP Create and advertise a default route

EIGRP Feasibility condition

EIGRP Header

EIGRP IP bandwidth-percent example

EIGRP Implementation by Non-Cisco Vendors

EIGRP LFA FRR

EIGRP Refining the behavior of load balancing with traffic-share

EIGRP SIA timers

EIGRP authentication

EIGRP auto-summary

EIGRP establishing remote neighbors

EIGRP header - ACK field

EIGRP named mode

EIGRP on the Nexus Platform

EIGRP redistributing named mode

EIGRP rib-scale

EIGRP seed metrics when redistributing

EIGRP split horizon verification

EIGRP split-horizon vs poison reverse

EIGRP unequal cost load balancing

EIGRP what happens when a feasible successor fails

EIGRP

EPC - Cisco Embedded Packet Capture

ERSPAN

EVE-NG supported Cisco and other vendor images

Equal-cost Multi-path routing

EtherChannel - Converting an L2 EtherChannel to L3

EtherChannel - LACP System ID

EtherChannel - LACP fast-switchover

EtherChannel - Load Balancing on CatOS

EtherChannel - Load balancing algorithm applied globally and per portchannel

EtherChannel - Maximum Number of Physical Links

EtherChannel - PAgP timer, hello interval, and age value

EtherChannel - Troubleshooting on Cisco IOS Switches

EtherChannel - Understanding LACP port and system priorities

EtherChannel - applying configurations to the interface

EtherChannel - implementing over 802.1Q tunneling

EtherChannel - load balancing algorithms

EtherChannel - max-bundle

EtherChannel - prerequisites for bundling

EtherChannel

Ethernet - Pause Frames

Ethernet - role of FCS field

Ethernet - speed and duplex mismatches

Ethernet - speed and duplex settings on an ISR4431

Ethernet CSMA-CD

Ethernet VPN (EVPN)

Ethernet administrative and operational encapsulation

Ethernet administrative operational mode

Ethernet frame types

Ethernet header

Ethernet over IP (EoIP)

Ethernet

FHRP - Comparison Table

FHRP - HSRP Resign Message

FHRP - interaction with routing protocols

FHRP - which ports should you configure

FHRP Communication Between Redundant Routers

FHRP Load Balancing Behavior

FHRP Protocols