SPAN


Router IP Traffic Export or RITE is a feature of Cisco IOS routers that is used to export IP packets to an interface or VLAN of choice.  RITE is similar to [SPAN](/span) for switches.

RITE is most often used to export traffic to an IDS to be inspected, but can also be used to send traffic to a packet sniffer such as [Wireshark](/wireshark) for analysis and troublshooting.

Links:

https://networklessons.com/cisco/ccie-routing-switching/router-ip-traffic-export-rite

RITE

QoS - Assured Forwarding PHB values

QoS - Bc and Be bucket sizes

QoS - CBWFQ

QoS - Classification by IP

QoS - CoS to DSCP and DSCP to CoS mapping

QoS - Hierarchical QoS

QoS - Jitter

QoS - LLQ applied only outbound

QoS - LLQ bandwidth configuration

QoS - LLQ priority commands

QoS - Nested policy maps

QoS - Policing command syntax

QoS - QoS Groups

QoS - RSVP bandwidth and flow reservations

QoS - Tail Drop

QoS - Using CBWFQ with traffic shaping

QoS - WRED traffic profile thresholds

QoS - applying policies

QoS - auto qos trust

QoS - classification

QoS - effects of bandwidth interface command

QoS - is WRED really a congestion avoidance mechanism

QoS - key and nonkey fields

QoS - marking

QoS CBWFQ traffic allocation when there are empty queues

QoS CoS vs DSCP

QoS Hierarchical Queuing Framework (HQF)

QoS Modular QoS CLI (MQC)

QoS Network Based Application Recognition (NBAR)

QoS RSVP Path message

QoS RSVP Resv message

QoS Resource Reservation Protocol (RSVP)

QoS Traffic Shaping Parameters

QoS hardware queues scheduling

QoS how traffic shaping is achieved

QoS max-reserved-bandwidth

QoS mechanisms kick in only when there is congestion

QoS models

QoS specifying reserved bandwidth for a class belonging to a policy-map

QoS tokens in shaping and policing

QoS traffic policing

QoS traffic shaping

QoS using a shared policer on Nexus devices connected with vPC

REST API security

REST API token-based authentication

RIP - poison reverse

RIP timers

RSPAN

Rapid Spanning Tree port states

Real-time Transport Protocol

Redistribute static route into EIGRP stub router

Reliable Transport Protocol

Rev Up To Recert

Route-Map and ACL matching

Route-map - multiple statements with sequence numbers

Route-map matching OSPF router ID

Route-map with multiple parameters in one match statement

Route-map without a match statement

Route-map

Routers - what is a loopback interface

Routing -  Difference between IGPs and EGPs

Routing - A Directed Broadcast is only detected by the last router

Routing - Administrative Distance

Routing - Cisco Performance Routing (PfR)

Routing - Distance Vector Routing Protocols

Routing - Distance-vector routing protocol use cases

Routing - Dynamic routing protocols

Routing - How the routing table is populated

Routing - IP event dampening

Routing - Injecting a Static Route

Routing - Link State Routing Protocols

Routing - Link-State vs Distance-Vector routing protocols

Routing - Link-state routing protocol use cases

Routing - OER master and border routers

Routing - PfR MC and BR on same device

Routing - Using Anycast with BGP Multipath

Routing - address-family

Routing - default gateway

Routing - default routing using DHCP

Routing - directed broadcast

Routing - fully specified route

Routing - ip default-network command

Routing - l2transport

Routing - link-local IPv6 next hop address needs exit interface

Routing - network vs redistribute connected commands

Routing - redistribute command

Routing - redistribution and the routing table

Routing - route tagging

Routing - seed metrics

Routing - what is a WAN port

Routing - what is recursive routing

Routing NX-OS passive-interface default

Routing Table

Routing in both directions

Routing what if the administrative distance is the same

Routing

SD-WAN - EVE-NG connection options

RITE

Links to this page: