
[VLAN Access Lists](/vlan-access-lists) are a security feature used to provide control of traffic within a [VLAN](/vlan).  VACLs can reference [ACL](/acl)s to match various criteria.

When a VACL is configured to reference an ACL, any changes made to the ACL are active immediately.  There is no need to remove and readd the VACL before it can be applied.

Links:

https://forum.networklessons.com/t/vlan-access-list-vacl/1155/3

https://forum.networklessons.com/t/vlan-access-list-vacl/1155/58?u=lagapidis

https://networklessons.com/cisco/ccie-routing-switching/vlan-access-list-vacl

VACL - Changes to ACL are active immediately

Switchport - ISL

Switchport - show vlan internal usage

Switchport access

Switchport modes

Switchport trunk configuration ignores access commands

Switchport trunk encapsulation

Switchport trunk

Symmetric Digital Subscriber Line (SDSL)

Syslog - Logging buffered command

Syslog - logging discriminator

Syslog - terminal monitor

Syslog relay or proxy

Syslog severity levels

Syslog

TCP - Congestion control

TCP - Header

TCP - SEQ and ACK values

TCP - Slow start

TCP - Three-way handshake

TCP - Urgent pointer field

TCP - Window Size Scaling

TCP - factors affecting segment size

TCP - role of checksum field

TCP MSS and window size

TCP RST flag

TCP SYN timeout

TCP header options

TCP phantom byte

TCP-IP model

TFTP

Tcl Shell

Telnet

Time to live

Traceroute - Interpreting output

Traceroute asterisk and !H responses

Traceroute

Transparent Cisco IOS Firewall use cases

Transport Layer port number

Troubleshooting - using Telnet to test transport layer ports

Troubleshooting a slow network

Troubleshooting high CPU and memory usage on a switch

UDP - Header

UDP - Maximum Datagram Size

Unicast Reverse Path Forwarding (uRPF)

Unicast traffic

Unknown unicast traffic

Upgrade your R&S skills to modern networking

VACL - use cases

VACL vs ACL

VLAN - Extended Range

VLAN - Native VLAN best practices

VLAN - Native VLAN on a router on a stick

VLAN - Private VLAN

VLAN - QinQ troubleshooting

VLAN - Trunk interfaces don't appear in `show vlan` output

VLAN - VLAN IDs 0 and 4095

VLAN Access Lists

VLAN Mapping

VLAN SVI status

VLAN Tag

VLAN control frames

VLAN

VLANs - 802.1Q tunneling (QinQ)

VLANs - Dynamic VLAN membership (VMPS)

VLANs - QinQ and CDP

VLANs - Vlans allowed and active in management domain

VLANs - when a tagged frame arrives on an access port

VLANs SVI

VPN - IKEv2 peer address of 0.0.0.0 0.0.0.0

VPN - Interesting Traffic

VPN - NAT Exemption

VPN - crypto keepalive

VPN - default gateway for site to site VPN

VPN - default gateway of VPN client

VPN - split tunneling

VPN DVTI tunnel source

VRF - Definition mode

VRF - VPNv4 address

VRF capability vrf-lite command

VRF lite route leaking

VRF sharing across multiple routers

VRF use cases

VRRP - Virtual IP doesn't respond to pings

VRRP - load balancing

VRRP - support for authentication

VRRP - using the same ID on different interfaces

VRRP - using the same ID on subinterfaces

VRRP on sub-interfaces

VTP - Client can't modify VLANs

VTP - Code Field

VTP - Multiple Servers with VTP version 2

VTP - Per interface configuration

VTP - Pruning the Extended VLAN ID Range

VTP - Revision Numbers on transparent switch

VTP - Versions